Your Cart

Set includes:

4x LX F3.3-H 3,27 kWh battery module

1x LYNX HV F-H Battery Control Unit

– Usable Energy: 13.10 kWh

– Nominal voltage: 409.6 V

– Operating voltage range: 364.8~460.8 V

– Nominal Charging/Discharging Current: 25 A

– Nominal Power: 10.24 kW

– Communication: CAN

– Operating Temperature: Charge: 0<t≤50 °=”” c=”” discharge:=”” -20<t≤50=”” c<=”” p=””></t≤50>

– Humidity: ≤ 95%

– Altitude: ≤ 2000 m

– Protection Degree: IP55 (Outdoor / Indoor)

– Installation Location: Ground-Mounted

– Safety Standard and Certification: IEC62619, CEC

– EMC Standard and Certification: CE, RCM

– Transport Standard and Certification: UN38.3

GOODWE Lynx-HV F-H PLUS control unit




The Lynx Home F series is compatible with the ET series (3-phase hybrid inverter), the EH series (1-phase hybrid inverter) and the battery inverters of the BH series (1-phase) and BT series (3rd generation). -phase) compatible.


Possible system connections of the GoodWe high-voltage battery

The high-voltage-system with 2-5 battery towers can be combined with the GoodWe ET plus series. The ET Plus series has a battery voltage range of 600 Vmax.
A tower with 5 battery modules has an operating voltage range of 456-576 V and therefore fits the ET plus series.
The same applies to the BT series.

The inverters of the GoodWe EH series (1-phase) can be connected to a battery tower and a maximum of 4 battery modules of the GoodWe high-voltage battery.
The battery voltage range of the EH series is 460 Vmax. For the Lynx Home F with 4 battery modules, the battery voltage range is 365-461 V and thus meets the range of the EH series.
The same applies to the BH series.



The high-voltage battery from GoodWe is installed via plug-and-play without additional parameterization of the individual battery modules.
The battery modules have built-in handles that are used to stack the modules.
A module weighs 43 kg.
Additional cabling between the modules is not necessary.
To establish the communication, the already existing communication cable (BMS cable) is the GoodWe inverter directly with the PCU.

The battery cable (diameter: 6 mm²) is used for the power transmission between the inverter and the PCU.
A PE cable is also required for grounding the battery and the inverter, it is not included in the scope of delivery.
Everything is then put into operation via the GoodWe PV Master App.

The GoodWe high-voltage battery can be used for emergency and backup power.

Product and performance guarantee of 10 years.

Datasheet English
Datasheet German
Operations manual English
Warranty terms English


Quantity of kWh


5 f 2 d 5f2d0210b1ef4df68877eeef72b181f2d6cbf765 det sb gw lx f13 1 h jpg 600x600@2x - Store your own power
GoodWe LX F13.1-H model Plus

In stock

Decrease product quantity. Increase product quantity.